Air Conditioner
Samsung
Updated Jul 26, 2026
Samsung AC E201 Error — Indoor/Outdoor Unit Mismatch & Fix
E201
Samsung · Air ConditionerE201 means the number of indoor units detected does not match the outdoor unit setting. Co…
Quick answer
E201 means the number of indoor units detected does not match the outdoor unit setting. Common after installation or when adding/removing indoor units.
What E201 means
During initial power-up, the outdoor unit performs a "tracking" process to discover how many indoor units are connected. E201 appears when the count does not match the configured setting on the outdoor PCB.
How to fix it
This is an installation/configuration error, not a parts failure.
What does the E201 code mean?
E201 indicates a mismatch between the number of indoor units physically connected and the quantity set on the outdoor unit's DIP switches or software configuration.
Common causes
- Incorrect DIP switch setting on the outdoor PCB
- Communication cable disconnected from one indoor unit
- Faulty communication cable or wrong polarity
- Indoor unit powered off or not commissioned
Advertisement · In-content
How to fix the E201 error
Verify indoor unit count
Confirm how many indoor units are physically wired to the outdoor unit.
Check outdoor DIP switches
Open the outdoor unit control panel and set the indoor-unit quantity switch to match.
Inspect communication cables
Ensure all indoor units are wired with the correct polarity (check terminal labels).
Power cycle the system
Turn the entire system off at the breaker for 5 minutes, then restore power so the tracking restarts.
Safety first: The outdoor unit contains high-voltage components. Only a qualified installer should adjust DIP switches.
Part you may need: Communication cable / DIP switch setting
This is typically resolved during commissioning. If E201 appears on an existing system, a cable may have come loose.
Frequently asked questions
Is E201 a fault?
It is a configuration error, not a component failure. Correct the settings and it clears.
Can I fix it myself?
If you installed the system, yes — adjust the DIP switch. Otherwise, call the installer.
✎ Written by
REZAUL Karim (Riad)
REZAUL Karim (Riad) is the founder of ErrFixHub and a hands-on electronics and home-appliance repair specialist with over 15 years of experience diagnosing and fixing air conditioners, washing machines, refrigerators, inverters and other household appliances. He built ErrFixHub to turn cryptic error codes into clear, step-by-step fixes anyone can follow — cross-checking every code against manufacturer documentation and real repair-bench experience.
